Pyrax Carving Wax
Product Detail:- Ideal wax blocks specially developed to provide dentistry & jewelry technicians a wax suitable for carving most intricate models.Tough and hard, Bubble free, Does not chip or flake, Takes polish while carving, Precise modelling, Does not stick to model and instruments
Application:- For modeling various tooth forms, Small modeling techniques in jeweler’s workshop
Composition:- Blend of Hydrocarbon Waxes, Colorant & Excipients
Packing:- Total 40 Blocks (12 x 12 x 35mm) in individual box, Net wt. = 200g Available in 4 Colors – Red, Blue, Green & Translucent Natural
Shelf Life :- 3 years from the date of Manufacturing.
Pyrax Caviact (Tooth Etching Gel)-1 syr X 5ML
Application:- Used for conditioning both dental enamel and dentine surfaces prior to the placement of an adhesive restoration
Composition:- Ortho Phosphoric Acid, Methylene Blue Dye, Benzalkonium Chloride, Purified Water and Thickening agent
Pyrax Cavibond – Zinc Oxide Eugenol Temporary Cement
Product Detail:–
Cavibond is a polymer reinforced Zinc oxide €“Eugenol cement for temporary restorations. Material have excellent physical properties because of polymer resin used as reinforcing agent. Cavibond is quick set, easy to mix with high compressive and tensile strength, excellent abrasion resistance and low erosion.
Pyrax Cavity Varnish – 15 ml
Product Details:- Cavity Varnish is a copal resin based protective varnish for the insulation of the exposed dentine, reduces penetration of fluids into the tooth . Fluoride provides a thermal barrier for deep restorations.
Application:- Cavity Varnish is used as cavity liner and dentinal tubuli sealer. It assures perfect protection to the exposed surface of dentine in teeth prepared for permanent fillings or restorations and is useful as an immediately varnish prior to the insertion of amalgams, cements or composites.
Composition:- Copal Resin, Acetone, Sodium Fluoride & Excipients.
Packing:- 1 x 15 ml Glass bottle
Shelf Life:-3 years from the date of Manufacturing.
PYRAX CAVITYFIL SILVER ALLOY (48%) SPILL 2 – 50 CAPSULES
Box of 50 capsules YELLOW COLORÂ – 1 spill (400mg alloy powder +400 mg Mercury)
The technically advanced PRE DOSED NON GAMMA 2 FINE GRAIN 48% AMALGAM POWDER, with High Strength ensures longevity and patient satisfaction. The alloy to mercury ratio 1:1 ready for mixing on a amalgamator. The compressive strength of PYRAX CAVITYFIL at 24 hours is 510 MPa, and the dimensional change during hardening is +0.02%.
PYRAX CAVITYFIL SILVER ALLOY (48%) SPILL2 – 50 CAPSULES
Box of 50 capsules BLUE COLORÂ – 2 spill (600mg alloy powder +600 mg Mercury)
The technically advanced PRE DOSED NON GAMMA 2 FINE GRAIN 48% AMALGAM POWDER, with High Strength ensures longevity and patient satisfaction. The alloy to mercury ratio 1:1 ready for mixing on a amalgamator. The compressive strength of PYRAX CAVITYFIL at 24 hours is 510 MPa, and the dimensional change during hardening is +0.02%.
Pyrax CB 10 Crown and Bridge Heat Cure Acrylic Material Resin
Product Details:-
VITA SHADE heat cured acrylic resin for temporary crown with excellent flow characteristics, good tensile strength and color stability.
Application:-
Accurate Fit long working time in its dough stage.
Flow able and practicable consistency after mixing.
Exceptionally high mechanical strength and high luster finish.
Cadmium free composition.
Composition:-
Polymethyl-methacrylate resin, cross linking agents, pigments.
Pyrax Cold Cure SC-10 Tooth Colored Self Cure Temporary Acrylic Crown & Bridge Material (SC-10 VITA Shaded Self Cure Acrylic Resin)
Product description:-
- PYRAX Self Cure 10 (VITA Shaded Self Cure Acrylic Resin) :- Our company offers Sc 10 Tooth Colored Cold Cure For Crown. It is known for its high color stability and remarkable wear resistance. It is an Acrylic polymer with a high molecular weight. This polymer is employed for the rebuilding of the aesthetical sides of bridge & crown and of frontal crown lacking their metallic structure.
- Â VITA SHADE cold cured acrylic resin for temporary crown with excellent flow characteristics, good tensile strength and color stability.
Pyrax Cold Mould Seal- (SEPARATING SOLUTION FOR EASY SEPARATION OF ACRYLIC & PLASTER)
Application:- Prevents denture from sticking to stone during acrylic processing
Uniform film thickness permits closer adaptation of acrylic resin to model.
Prevents distortion in fitting of acrylic resin pink color emulsion
Composition:- Alginate, excipients
Pyrax D Fix Cream (Denture Adhesive Cream) – 15 gms
Pyrax Dental Zinc Phosphate Cement
Pyrax Dental Zinc Phosphate Cement (1 x 30 gm powder jar, 1 x 15 ml Liquid, 1 x spoon, 1 x Mixing pad) Product From Factory
Product Description:-
Product Details:- Zinc Phosphate cement is a two component product i.e powder and liquid, Which contains inorganic metal salts and phosphoric acid respectively.
Pyrax Endocanal Gel Syringes (E.D.T.A)
Product Details:- Endocanal gel is based on Di sodium EDTA and Carbamide peroxide.
Application:- Used in chemical and mechanical cleansing and enlarging of root canals. It lubricates the root canal, chelates the calcium salts to facilitate endodontic instrument penetrations, due to its effervescent action with sodium hypochlorite solution, cleaning of root canal becomes very easy. The use of sodium hypochlorite with the gel promotes internal bleaching of the tooth. This process is enhanced by the release of oxygen from Carbamide peroxide.
Composition:- 17% Di sodium EDTA, Carbamide Peroxide, Polysorbate, Purified water and Excipients.