Product description:-
How Plier Curved
Similar to HOW PLIER CURVED but with 45° angled tips for convenient access to lingual and other difficult to reach areas.
Matching serrated tips hold wires firmly at a convenient working angle.
POLODENT HOW PLIER CURVED
Rs.1,600.00 Rs.1,299.00
How Plier Curved
Similar to HOW PLIER CURVED but with 45° angled tips for convenient access to lingual and other difficult to reach areas.
Matching serrated tips hold wires firmly at a convenient working angle.
Be the first to review “POLODENT HOW PLIER CURVED” Cancel reply
Related Products
POLODENT HARD WIRE CUTTER PLIER
Polodent Hard Wire Cutter used to trim hard orthodontic wires to the proper length for use in creating orthodontic appliances.
These sharp and strong instruments are often fabricated from stainless steel or another hard metal in order to stand up to and push through the hard wires they cut.
POLODENT BOON’S GAUGE STAINLESS STEEL
The flat portion rests on the incisal/occlusal surface and the pin measures various heights of 3.5, 4, 4.5, 5mm to help obtain correct bracket height.
This one have lid pins for measurement.
POLODENT MATHIEW PLIER WITH HOOK
Used for the application of elastic ligatures used in orthodontic work.
Methiew Plier Smaha with ring is made of very thin and fine tip and a ring on handle for making loops with ligature wires.
POLODENT BIRD BEAK PLIER LONG PLIER
100% Rust Free Fully Autoclavable Stainless Steel Instrument
Maximum Resistance to Wear Corrosion.
Easy in Grasp, Grip and Clean as the Handle Solid With Gentle Textured Groove 6mm.
Perfect balance of the Instruments and reduced risk of slipping.
POLODENT MATHIEW PLIER WITH SMAHA
Used for the application of elastic ligatures used in orthodontic work.
Methiew Plier Smaha with ring is made of very thin and fine tip and a ring on handle for making loops with ligature wires.
POLODENT BRACKET REMOVER CURVED PLIER
Bracket removing plier is designed to break the bond between orthodontic brackets and teeth so they could be removed with ease.
POLODENT LINGUAL ARCH PLIER
Polodent Lingual Arch Plier
Used to bend metal strips or wire used in orthodontic work.
Lingual arch forming plier, forfast forming all lingual retainers.
POLODENT MATHIEW PLIER WITH RING FINE
Used for the application of elastic ligatures used in orthodontic work.
Methiew Plier Smaha with ring is made of very thin and fine tip and a ring on handle for making loops with ligature wires.
Polodent Distal End Cutter
Description:-
Distal End Cutter cuts wires close to the buccal tube and safely holds the distal ends.The tungsten carbide inserted tip ensure precision cutting, long wear and unsurpassed cutting performance.
POLODENT NANCE LOOP FORMING PLIER
Nance Loop Forming Plier is an orthodontic instrument specially designed to bend arch wires into variously shapes loops.
Four different sized steps for versatility.
POLODENT BRACKET REMOVER STRAIGHT PLIER
100% Rust Free Fully Autoclavable Stainless Steel Instrument
Maximum Resistance to Wear Corrosion.
Easy in Grasp, Grip and Clean as the Handle Solid With Gentle Textured Groove 6mm.
Perfect balance of the Instruments and reduced risk of slipping.
POLODENT ORTHODONTIC CINCH BACK PLIER
Double-headed plier designed to cinch back SS and NiTi wires in all quadrants.
Double head for easy access to right and left sides.
Recently Viewed
CAVITYFIL SILVER ALLOY (48%) SPILL1/2 – 50 CAPSULES
The technically advanced PRE DOSED NON GAMMA 2 FINE GRAIN 48% AMALGAM POWDER, with High Strength ensures longevity and patient satisfaction. The alloy to mercury ratio 1:1 ready for mixing on a amalgamator. The compressive strength of PYRAX CAVITYFIL at 24 hours is 510 MPa, and the dimensional change during hardening is +0.02%.
Composition:- Ag 48% Sn 23.3 % Cu 28.7%
Polodent Extraction Forcep #90 Upper Molar Left Cow Horn Premium
Extraction Forceps Premium are meticulously crafted dental instruments designed for the extraction of teeth with precision and ease.
These forceps are made from high-quality stainless steel, ensuring durability and resistance to corrosion.
The beaks of the forceps are specifically shaped and angled to securely grip the tooth during extraction, minimizing trauma to the surrounding tissues.
The ergonomic design of the forceps handles offers a comfortable grip and optimal control, allowing the dentist or oral surgeon to exert the necessary force with ease.
The forceps are available in a variety of sizes and designs to accommodate different tooth types and extraction requirements.
There are no reviews yet.